动态校准仪臭氧间接传递技术

对5台主流动态校准仪开展臭氧间接传递技术研究,对动态校准仪的准确性、可靠性、稳定性及臭氧传递的线性方程等性能参数进行了实验室考察。总体而言,发生型动态校准仪和分析型动态校准仪均可用于臭氧传递工作中。分析型动态校准仪可直接进行臭氧传递,发生型动态校准仪在臭氧传递前必须进行预校准。建议至少每3个月对发生型动态校准仪进行1次臭氧传递,每6个月对分析型动态校准仪进行1次臭氧传递。     

地铁多线换乘车站火灾模型实验研究—(1)模型装置设计

为研究地铁网络化运营枢纽车站火灾烟气扩散特征和防排烟技术，根据工程资料和标准规范对典型多线换乘车站进行1∶10火灾实验模型设计，并依据设计方案完成车站模型主体结构和通风排烟系统的搭建，同时在各个防烟分区设计安装温度、流速、烟气浓度和热辐射测量装置，可实现对“T”形、“十”形和“L”形换乘等不同换乘形式车站的火灾场景模拟和危险参数测量。研究结果表明:该模型装置能够开展一系列针对不同换乘形式和通风模式的火灾实验，对于全面揭示大型换乘车站火灾烟气运动规律、验证并优化火灾防排烟设计方法、支撑复杂结构枢纽车站火灾烟气控制技术具有重要意义。     

政府干预农地流转:农户收入及资源配置效率

本文基于江苏省苏北地区灌云县和金湖县的农户调研,采用内生性处理回归模型考察政府干预下土地流转对不同类型农户收入的影响,并从农户土地和劳动力资源配置效率的角度解释农户收入变化的根源。研究结果表明,政府干预下土地流转对不同类型农户收入的影响效应有很大差异,农户土地转入后收入增加了161.2%,转出户收入并未显著增加;从农户资源配置角度考察,发现农户转入土地后农业生产效率显著提高,转出土地后农业生产率降低;农户土地转出后非农工作时间和工作报酬并未显著增加,表明转出户并未提高非农劳动力资源配置效率。同时,本文比较政府主导和农户自发两种类型农地流转对农户收入和资源配置效率的影响差异。结果发现,相对于自发土地流转的农户,政府主导下农户转入更大面积土地,并显著提高了单位面积土地生产效率和家庭收入水平;而政府干预土地转出不利于农户土地和劳动力资源配置效率及收入水平的提高。基于以上分析,本文认为政府干预降低了土地流转交易费用,有利于转入户扩大土地面积,实现规模经济效益,进而增加转入户收入;然而,政府干预下转出户资源配置面临较大约束,配置效率和收入都未能实现最大化。因此,政府在完善农地流转服务政策的同时,应当尊重农户土地流转意愿,使得农户土地流转符合家庭资源配置收入最大化目标。同时,要通过非农就业培训、发展非农经济,吸纳更多劳动力转移到非农业领域,进一步促进农村土地流转和规模经营,优化农村土地和劳动力资源配置效率,持续增加农民收入。     

农户兼业阶段性分化探析

当前农户兼业的阶段性分化其本质是农户之间兼业进程的不统一,进而导致了严重的农村社会分化问题。本文利用江苏省苏北地区农户调研数据分析了当前农户兼业阶段性分化的现状及其带来的社会后果,利用似不相关双变量Probit模型分析了农户兼业阶段性分化的原因,得出了阻碍农户兼业发展的主要制约因素。结果显示,家庭人力资本稀缺是农户实现兼业生产的主要制约因素,农户无法进行非农工作主要是受到家庭人口规模小、老龄化严重的限制,这一部分农户家庭生活水平低,面临严重的"贫困陷阱"。政府直接干预土地流转使部分农户被动退出了农业生产,形式上实现了农户兼业进程的统一,但损害了农户的土地权益,造成农村土地产权不稳定,降低了农户自发性退农倾向,妨碍了土地市场的进一步发展,因此实质上对农户兼业进程起到了阻碍作用。此外,由于土地承包经营证书对承包经营权权能、地块四至等信息界定不清晰,对农户兼业进程的发展没有刺激作用。综合以上结论可知,土地产权以及农户家庭人力资本是导致当前农户阶段性分化的主要原因。政府不应对农村土地市场进行直接干预,而应通过完善农村社保体系、扶持农户非农就业、加快新一轮土地确权发证工作以促进土地市场与农户兼业进程的发展,在市场机制为主、政府调控为辅的环境下合理实现土地的集中与农业规模经营。     

基于生态足迹的武汉城市圈生态承载力评价和生态补偿研究

在推进新型城镇化和生态建设的背景下,客观定量评价区域生态环境状态,是当前我国生态建设重要而紧迫的任务之一。高密度的人类活动会对自然生态系统产生超负荷的压力,通过生态承载力的分析能够定量测度这种状况,为区域可持续发展提供借鉴意义。基于生态足迹模型,计算了2008年和2013年武汉城市圈各县域单元的生态足迹/承载力,并进行了时空变化分析。研究发现武汉城市圈各县域单元的生态足迹和生态承载力在空间上存在显著的差异性,生态足迹逐年增加,生态承载力的变化相对较小,出现两级分化的现象。根据生态足迹/承载力进行跨区县生态补偿测算,得到2008年和2013年武汉城市圈48个县域的转移支付情况,表明如果运用财政转移支付的手段,整个区域能够达到生态系统供给和需求动态平衡的目标,缓解武汉城市圈的生态压力,实现武汉城市圈的可持续发展。     

Insights into the electron transfer mechanisms of permanganate activation by carbon nanotube membrane for enhanced micropollutants degradation

● A CNT filter enabled effective KMnO₄ activation via facilitated electron transfer. ● Ultra-fast degradation of micropollutants were achieved in KMnO₄/CNT system. ● CNT mediated electron transfer process from electron-rich molecules to KMnO₄. ● Electron transfer dominated organic degradation. Numerous reagents have been proposed as electron sacrificers to induce the decomposition of permanganate (KMnO₄) by producing highly reactive Mn species for micropollutants degradation. However, this strategy can lead to low KMnO₄ utilization efficiency due to limitations associated with poor mass transport and high energy consumption. In the present study, we rationally designed a catalytic carbon nanotube (CNT) membrane for KMnO₄ activation toward enhanced degradation of micropollutants. The proposed flow-through system outperformed conventional batch reactor owing to the improved mass transfer via convection. Under optimal conditionals, a > 70% removal (equivalent to an oxidation flux of 2.43 mmol/(h·m²)) of 80 μmol/L sulfamethoxazole (SMX) solution can be achieved at single-pass mode. The experimental analysis and DFT studies verified that CNT could mediate direct electron transfer from organic molecules to KMnO₄, resulting in a high utilization efficiency of KMnO₄. Furthermore, the KMnO₄/CNT system had outstanding reusability and CNT could maintain a long-lasting reactivity, which served as a green strategy for the remediation of micropollutants in a sustainable manner. This study provides new insights into the electron transfer mechanisms and unveils the advantages of effective KMnO₄ utilization in the KMnO₄/CNT system for environmental remediation.     

Development of heat transfer and evaporation model of LNG covered by Hi-Ex foam

Natural gas is a kind of clean, efficient green energy source, which is used widely. Liquefied natural gas (LNG) is produced by cooling natural gas to −161 °C, at which it becomes the liquid. Once LNG was released, fire or explosion would happen when ignition source existed nearby. The high expansion foam (Hi-Ex foam) is believed to quickly blanket on the top of LNG spillage pool and warm the LNG vapor to lower the vapor cloud density at the ground level and raising vapor buoyancy. To identify the physical structure after it contacted with LN₂ and to develop heat transfer model, the small-scale field test with liquid nitrogen (LN₂) was designed. In experiment, three layers including frozen ice layer, frozen Hi-Ex layer and soft layer of Hi-Ex foam were observed at the steady state. By characterizing physical structure of the foam, formulas for calculating the surface of single foam bubble and counting foam film thickness were deduced. The micro heat transfer and evaporation model between cryogenic liquid and Hi-Ex foam was established. Indicating the physical structure of the frozen ice layer, there were a certain number of icicles below it. The heat transfer and evaporation mathematical model between the frozen ice layer and LNG was derived. Combining models above with the heat transfer between LNG, ground and cofferdam, the heat transfer and evaporation mathematical model of LNG covered by Hi-Ex foam was developed eventually. Finally, LN₂ evaporation rate calculated by this model was compared with the measured evaporation rate. The calculated results are 1.2–2.1 times of experimental results, which were acceptable in engineering and proved the model was reliable.     

Experimental investigation of a solar water distillation-cum-drying unit

In this communication, a new design of solar-energy-based water distillation cum drying unit with parabolic reflector has been designed, fabricated, and tested. Bitter gourd and potato slices are chosen as a drying commodity. Thermal performance of the developed system has been evaluated based on the experimental results and using linear regression analysis. Heat transfer coefficients (convective, evaporative, and radiative) for solar distillation system have been observed to be 2.48–4.09, 13.25–52.38, and 8.75–9.66 W/m²°C, respectively. Overall thermal efficiency and exergy efficiency for the distillation system has been found to be 18.77% and 1.2%, respectively. The convective heat transfer coefficient for potato slices are observed higher for initial hours and decreases as the day progresses. The average convective heat transfer coefficients for bitter gourd and potato slices have been observed as 2.18 and 5.04 W/m²°C, respectively. Experimental error in terms of percent uncertainty for bitter gourd and potato slices are found to be 42.93% and 37.06%, respectively. The present design of solar distillation and drying in a single unit could be beneficial for the development of remote, arid, and rural areas.     

城市生态系统复合下垫面碳通量特征——以上海市奉贤大学城为例

随着城市化进程的加速和城市人口规模的增加,城市已成为最大的碳源,研究城市生态系统对大气二氧化碳的贡献成为碳循环研究的焦点问题之一。基于研究区域内土地利用现状和一年的涡动观测系统观测数据,结合地理信息技术(Arc GIS)和通量计算工具(Eddypro及ART Footprint Tool)以及碳通量足迹模型分析了上海奉贤大学城碳通量足迹特征,基于此探讨不同下垫面类型,包括以草本和木本等透水层为主的下垫面(称为自然系统),以建筑物、道路等不透水层为主的下垫面(称为社会系统)碳通量的变化特征。研究结果表明:1)在不同风向上,碳通量贡献区范围随着大气稳定度的增加而扩大。大气处于稳定条件下,非主风向上的碳通量贡献区范围(最大范围1 100 m)比主风向上的碳通量贡献区范围(最大范围780m)要大;当大气处于不稳定条件下时主风向和非主风向下的碳通量贡献区范围相差不大(最大范围分别为321和351m)。2)不同下垫面其源汇特征不同,以绿色植物为主的自然系统年碳通量均值为–4.1μmol/m~2/s,表现为碳汇;社会系统的年碳通量均值为8.6μmol/m~2/s,表现为碳源。3)自然系统的碳通量日变化具有较明显的季节分异,变化特征大致呈"U"型;社会系统的碳通量日变化没有明显的季节分异,变化特征大致呈"M"型。绿色植物对城市生态系统的大气二氧化碳有降低作用,结合自然和社会系统的碳通量变化特征可以为以后合理规划城市布局,建立低碳城市提供服务。     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.